Kemapower on Grid and off Grid Inverter Hybrid Solar Power Inverter 220V 3kw 6kw 11kw Single Phase Solare Solar MPPT Inverter

Product Description

   Off Grid Hybrid Solar inverter

  SUB-D 3-11KW

Product Description

KEY FEATURES

1.High Frequency off grid hybrid solar inverter SUB-D 3-11KW ,PF=1
2. 3 in 1 design, Power Inverter + MPPT controller + Grid Charger 
3. Working without battery during daytime 
4. Support lithium activation wake-up and cold start function
5. Auto restart while AC is recovering
6. Intelligent power supply mode, intelligent Distribution of solar panel/mains/battery power shares
7. AC and PV charge voltage adjustable,  meet different types battery charge requirements
8. Adjustable Charge Current & Voltage, selectable Lead acid / Lithium battery
9. Solar,Grid and Battery Energy complement each other,priority selectable 
10. RS232, BMS/RS485,Dry Contact Communication
11. WiFi Plug or GPRS option for Mobile App, Automatic generator station option 
12.  Economical model optional for 3KW , small capacity MPPT and PV input 
13. 6.2KW/11KW grid tie and parallel function option , max 9 units
14. Wide MPPT range 40--500VDC/120-500VDC, 60A/100A/150A for different modes
15. Intelligent 3 stage  AC battery charger, 60/80A/150A for different modes
16. Selectable Utility,Solar or Battery priority, power Saver Modes 
17. Pure sine wave output,  suitable for different loads
18. Protection for overload, over temperature,short-circuit, battery Low, battery reverse connection

PRODUCT DISPLAY

Specification

TECHNICAL SPECIFICATIONS

(Custom configurations available upon request.)

ITEM	Model	SUB-D-E3024	SUB-D-3624	SUB-D-6248	SUB-D-11048	SUB-D-6248GP	SUB-D-11048GP
INPUT	RATED POWER	3KW	3.6KW	6.2KW	11KW	6.2KW	11KW
	Voltage	220/230/240VAC
	Selectable Voltage Range	170-280VAC±3V (For Personal Computers)
		90-280VAC ±3V(For Home Appliances)
	Frequency Range	50 Hz/60 Hz (Auto sensing)
OUTPUT	Voltage	220/230/240VAC ± 5%(Bat Mode)
	Surge Power	2 times Rated power for 5 seconds
	Overload Protection	21s@105%~150% Load; 11s@150%~200% Load; 400ms@>200% Load
	Efficiency,PV to INV.	97% (Peak)
	Efficiency,Battery to INV.	94%(Peak)
	Transfer Time	10 ms (For Personal Computers) ; 20 ms (For Home Appliances)
	Waveform	Pure sine wave
	ParallelExtension	infeasible	infeasible	infeasible	infeasible	Max 9PCS	Max 9PCS
OUTPUT GRID TIE CONNECTION	Output Voltage	NO				220/230/240VAC
	Grid Voltage Range	NO				195-253VAC
	Grid Frequency Range	NO				49-51±1Hz or 59-61±1Hz
	Output Current	NO				26.9A	47.8A
	Power Factor Range	NO				>0.99
	Conversion Efficiency	NO				98%
BATTERY & AC CHARGER	Battery Voltage	24 VDC		48 VDC
	Constant Charging Voltage(Adjustable)	28.2VDC		56.4VDC
	Floating Charge Voltage(Adjustable)	27 VDC		54 VDC
	Overcharge Protection	33 VDC		63 VDC
	Charge Current (Max)	60A	80A	80A	150A	80A	150A
SOLAR CHARGER	PV Array Power (Max)	3KW	4.2KW	6.2KW	2*5.5KW	6.2KW	2*5.5KW
	MPPTRange	50 ~ 500 VDC	150 ~ 500 VDC
	PV Work Range	300~400VDC
	PV Array Voltage (Max)	500 VDC
	Max PV Input Current	18A	18A	18A	18A/18A	18A	18A/18A
	Max PV Charge Current	60A	100A	100A	150A	100A	150A
	Max Charge Current	100A, AC+Solar adjustable	120A, AC+Solar adjustable		150A, AC+Solar adjustable	120A, AC+Solar adjustable	150A, AC+Solar adjustable
Display	LCD	Input/Output V/HZ; Load %, VA/W; Overload; Bat % VDC; Bat Type; PV1/PV2 V/WH; Charge/Discharge Current; Setup; Fault Code and Warning; Working Mode
	LED	AC/INV: Green Light Solid on—Output is powered by mains; Flashing—Output is powered by solar CHARGE: Green Light Solid on—Battery is fully charged; Flashing—Battery is charging FAULT: Red Light Solid on— Inverter fault; Flashing— Inverter warming
Setup/Adjust Parameter		Solar power /utility power/Battery priority, united Charge Current , AC Charge Amp, AC input range, VAC HZ, Bat VDC back to utility power, BAT VDC back to Bat Mode, Charge Source select ,Alarm on off , overload bypass, Bulk/ Floating Charge VDC, Bat Low Cut VDC ,equalization Charge VDC / mins / days,
Output Working Mode	Utility Uower Priority	default. Utility power priority, Solar and battery as backup when utility power not available
	Solar Priority(SUB Mode)	solar power priority, utility power supplement to load when solar power is not enough , utility not available, battery supplement to load. Working on daytime while No Bat
	SBU Priority	Solar power priority, When Solar power is not enough,battery to supplement.when battery power is not enough , utility power to load. Working on daytime while No Bat
OPERATING ENVIRONMENT	Humidity	20% to 95% Relative Humidity(Non-condensing)
	Altitude	No more than 1000m, lf 1000m<,Rate power will lower, MAX 4000m, Refer to lEC62040
	Noise	≤50db
	Operating Temperature	-10°C - 50°C
	Storage Temperature	–15°C - 60°C
Communication interface		N/A	RS232; BMS/RS485; WIFI Plug; Dry Contact; Parallel port for 6.2KW/11KW
Product Size	L*W*H	495*312*146			570*500*148	495*312*146	570*500*148
Net Weight (kgs)	Kg	9.13	10.52	10.79	18.99	10.79	18.99
Carton Size	L*W*H	565*385*195			708*570*241	565*385*195	708*570*241
Carton Weight	Kg	10.35	11.84	12.42	22.21	12.42	22.21
REMARK		SUB-GP Grid Tie + Parallel

Company Profile